HP Vectra VE5 4 User Manual page 41

8 Connect the power cable and the data cable to the rear of the drive.
The connectors are shaped to go in one way only. If you are not
sure which connector to use, refer to "Connecting IDE Devices", on
page 27.
Data cable
9 Install any other accessories before replacing the power supply and
cover. Reconnect all cables and power cords.
10 Verify the new configuration by checking the HP Summary Screen
(refer to chapter 3 for instructions on viewing the Summary Screen).
2 How to Install Accessories In Your PC
Installing Mass Storage Devices
Power cable
English 31