If A Post Error Message Is Displayed - HP Vectra VE5 4 User Manual

If a POST Error Message is Displayed

The Power-On-Self-Test (POST) can detect both an error and a change
to the configuration. In either case, an error code and short description
are displayed. Depending on the message, you will have one or more of
these choices:
Press to ignore the message and continue.
•
Press to run Setup and correct a system configuration error.
•
You should correct the error before proceeding, even if the PC
appears to start successfully.
Press to accept (validate) the change and update Setup's
•
configuration information.
Press to see more details about the message. After viewing
•
these details, you will be returned to the original POST display
screen. If the message is actually a change to the configuration you
have made (for example, you have just removed some memory), you
can then press
configuration information. Otherwise, press
message and continue, or press
system configuration error. (The number of choices you will have
available are dependent on the kind of error.)
to accept the change and update Setup's
to run Setup and correct a
3 Troubleshooting Your PC
If Your PC Does Not Start Properly
to ignore the
English 49