Service Mode - Miele DGC 6 Series Technical Information

Technical Information
Save and quit:
 Go back without saving: Press the Back touchpad.
 Save and go back: Press the OK touchpad. The selected option will
be set or carried out.
Quit: Press the  touchpad.

Quit without saving:
Press the  touchpad.
4.3

Service Mode

Initial requirements:
Switch off the machine.
Note:
In order to be able to operate the fascia touchpads, the time-of-day display
must be switched on, see Section 060-4.1.
Alternatively switch the appliance off and on.
Accessing:
Note:
After it is begun, the accessing procedure must be completed within 10
seconds.
1. Press and hold the Timer touchpad.
2. Press the  touchpad once.
3. Release the Timer touchpad.
4. Immediately press and release the Timer touchpad 3 times and on the
3rd time hold it until the service mode is indicated.
Acknowledgement indicator:
The display shows Service mode and the first service mode functions.
Options:
See Section 060-4.1 for instructions on menu navigation.
Submenu
Software version
Function/Description
ID number of the selected
module/software is
displayed.
114
Option
EPZ
ELP
EPI
Automatic table (ATAB)
LNG
FLASH
XKM
PSD
DGC 6xxx