Table 6-2: Programming Mode
1. Turn off the oven.
2. Close the door(s).
The access procedure must be completed within 10 seconds.
On double ovens, the service mode is separate for each oven. Use the
appropriate On/Off pad to access service mode for the desired oven. The
selected oven is indicated by the arrow in the display as follows:
1. Touch and hold the Clear pad.
2. Touch the On/Off pad.
3. Release all pads.
4. Touch the Clear pad 2 times.
5. Touch the Clear pad a 3
The display shows the following service options:
1. Refer to Table 6-3.
2. Touch the pad next to the desired function.
3. Use the Clear touchpad to back up to the previous menu or to cancel a
time and hold it for 5 seconds.
Indicates which oven (upper
or lower) is presently in
Displays the version of the
main and display electronics.
Retrieve and clear stored fault