Remote Agent Installation - HP Vectra E-Vectra Deployment Manual

HP Toptools

5.3.2 Remote Agent Installation

Device Selector
Select the device or group of devices that an agent needs to be deployed to. Right-click on the devices to
bring up the actions menu. Select the type of agent to deploy from the "Agent Deployment" sub-menu.
- Note -
HP Toptools agents will not install on unsupported systems. If you don't know the system type of an
individual system, the wrong agent will not be installed.
Upgrading existing HP Toptools agents remotely follows the same process as installing the HP Toptools
agents, except that Manage Drivers/Firmware needs to be selected instead of Agent Deployment. The
remaining steps are similar.
HP Toptools Deployment Guide Version 5.5
48