Windows 2000 Manual Deployment - HP Vectra E-Vectra Deployment Manual

SNMP Services
Installation of SNMP services is not required for HP desktop and mobile computers as these systems are
managed using DMI or WMI. However, if installed, SNMP services provides a quicker and more efficient
device discovery and identification of MAC addresses.
Complete instructions for installing SNMP services on Windows NT and Windows 2000 systems are in
Appendix A – Installing SNMP services. Note that any Service Packs need to be re-applied after SNMP
services are installed on Windows NT systems.
Installation Methods
There are several deployment options for HP Toptools for Desktops and HP Toptools for notebook
agents. These include:
•
Manual deployment
•
Use of the Toptools Device Manager for agent deployment to machines running Windows NT or
2000
•
Upgrade agents on W9X, Windows NT or 2000 machines
•
Use of a software distribution tool such as HP Openview DTA or Microsoft SMS
•
Create a package and distribute agents in mass

5.2.2 Windows 2000 Manual Deployment

HP Toptools utilizes the WMI protocol to manage Windows 2000 and Windows XP systems, whether they
are desktops or mobile computers.
Requirements
The system requirements for the WMI agent are as follows:
•
HP Vectra PC, HP Kayak PC, or HP Omnibook mobile computer.
•
Windows 2000
•
16 Mb free disk space on your PC
•
800 x 600, 256 color display or better, using small fonts
•
IP or IPX protocol installed and configured
•
Local administrator privileges
Agent Installation
The WMI agent are located on the HP Toptools CD or from the HP Toptools web site at
http://www.hp.com/toptools. The HP Toptools 5.5 version of the WMI agent is named TTWP55<nn>.exe.
HP Toptools Deployment Guide Version 5.5
HP Toptools
26