HP Vectra E-Vectra Deployment Manual page 46

HP Toptools
Monitor Information
The serial number from the monitor is automatically updated under Windows 9X and Windows ME if the
monitor and the BIOS support DDC calls; otherwise this information must be entered manually. Asset tag
information should also be entered in this screen.
File Copy
After the Serial Number and Asset Number are entered, the setup wizard copies the required files to the
destination directory. At this point the installation is complete.
Verify Installation
Open the local Toptools viewer to verify that the installation has succeeded.
To access the local Toptools, select Start HP Toptools for Notebooks HP Toptools. You should
see a screen with basic information about your Omnibook. This verifies the successful installation of the
HP Toptools of Notebooks DMI agent!
HP Toptools Deployment Guide Version 5.5
46