Windows Nt, 9X, Me Hp Toptools For Hp Omnibooks Manual Installation - HP Vectra E-Vectra Deployment Manual

5.2.4 Windows NT, 9X, ME HP Toptools for HP Omnibooks Manual Installation

Requirements
•
HP Omnibook mobile computer.
•
Microsoft Windows NT 4.0 SP4 – SP6A; Windows 95 with OSR 2.1 build 1214 or higher;
Windows 98 through Second Edition; or Windows ME.
•
16 MB free disk space
•
IP or IPX protocol stack installed and configured.
•
Administrator privileges on the local machine
Agent Installation
The HP Toptools for Notebooks agents are located on the HP Toptools CD. These agents are for the HP
Omnibook mobile computers. The same software can be downloaded from http://www.hp.com/toptools.
- Note -
If you have HP Omnibooks that were purchased prior to January, 1998, you should check the Omnibook
support web site at http://www.hp.com/go/omnibooksupport. The notebook matrix may be obtained from
http://www.hp.com/toptools/rvm/omnibook.html. Please note however, agents prior to version 4.1 are not
Y2K compliant.
Setup
The DMI agents are located on the HP Toptools CD or from the HP Toptools web site at
http://www.hp.com/toptools. The HP Toptools 5.0 version of the DMI agent is named TTDD50<nn>.exe.
Unpacking the files.
Unzip the file agents and place them in a temp directory for installation. These files can be deleted after
install is completed.
HP Toptools Deployment Guide Version 5.5
HP Toptools
40