HP Vectra E-Vectra Deployment Manual page 74

HP Toptools
When there are several hubs present, the Download Control dialog box will list them like this:
Here, only 10.5.8.29 needs to be updated.
Select all the devices that need to be updated.
If you have to change the community names of the devices in order to download the file to all of them at
the same time, click the Community Name button. This opens the Change SET_COMMUNITY_NAME
dialog box. Enter the new community name in the "SET_COMMUNITY_NAME" field and click the OK
button. Note, however, that if you selected more than one device, the community name you enter must be
valid for all of them.
Download package
Click the Download button and, when prompted, enter the drive letter designation of the computer's CD
drive; if the firmware files have already been copied to the correct directory on your hard drive, you will
not be prompted.
This screen asks for the HP Toptools CD, note that it is really referencing the Toptools for Hubs and
Switches CD. If this screen appears, the newly downloaded firmware was placed in the wrong directory.
The Download Manager gives you an estimate of the length of time it will take to download the firmware
for all the devices on the list. If you want to schedule the operation for another time, perhaps at night, click
the Schedule button, set the time, and click OK. Note: Make sure you leave the CD in the drive.
HP Toptools Deployment Guide Version 5.5
74