HP Vectra E-Vectra Deployment Manual page 15

Possible recommendations you will see are:
•
CPU is not at least 266 MHz
•
An IP ping of the default gateway and/or local system failed
•
Target system has less than 128 MB of RAM
•
Target system has a pagefile smaller than 150 MB
Step 4. Continue install wizard internet connection
If the HP Toptools installation wizard finds it can continue with installation, it will attempt to make a
connection to the HP Toptools website. If a failure occurs, you will be prompted by a dialog explaining
that the failure may be due to improperly configured network settings (if the IP pings performed during
system inspection failed), or improperly or non-configured proxy settings. The dialog will contain two (2)
buttons. One will launch the Network Settings applet, while the other will launch the Internet Connection
Wizard. There will also be a Skip, Next and Cancel button. Next will tell the Wizard to reattempt the
internet connection. If the connection fails, this dialog will be shown again. Skip will tell the Wizard to
ignore the failed internet connection. Cancel will exit the HP Toptools installation wizard.
- Note -
If the internet connection step is skipped, the databases (MEDS, ALERTS and RMDB) will be populated
with the data on the installation CD. It is recommended to create and maintain a live connection to the
internet in order to allow the HP Toptools installation wizard to check the HP Toptools website for patches
and/or updates, and to obtain the latest data for the databases.
Step 5. Upgrade previous toptools installation
The HP Toptools installation wizard will not upgrade a version of toptools earlier than 5.0. You will be
prompted to allow the HP Toptools installation wizard to uninstall any pre-5.0 toptools release. If the you
decline the uninstall, the HP Toptools installation wizard will exit.
The HP Toptools installation wizard will upgrade a toptools 5.0 installation.
Step 6. Component selection
The component selection dialog allows you to choose an installation location if this is the first time
toptools is being installed. If a previous version was found during system inspection, toptools will install in
this location and will not allow you to change location.
HP Toptools Deployment Guide Version 5.5
HP Toptools
15