Three Phase Measurement Screen Soft Keys - Pacific Power Source AFX Series Operation Manual

6.5.2

Three Phase Measurement Screen Soft Keys

The following five soft keys are available on the two three-phase measurement screens.
SOFT KEY
Meas. Page 2 (SK1) The first soft key allows toggling between the two available
Fault Status (SK2)
(SK 4)-

Entire Contents Copyright 2016 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
Description
measurement screens. The same can be accomplished by pressing
the MEAS button on the left hand side of the LCD display.
Pressing this soft key displays the Fault Status screen. The fault
status shows a history list of possible error or fault messages that
have been recorded by the power source.
The following soft keys are available to review or clear fault
messages:
Next Fault Scrolls to the next available fault message if
any.
Previous Fault Scrolls to the previous fault message if any.
Reset Faults Clear Fault Buffer
Clean and Refresh Clears displayed faults and updates
N/A
AFX SERIES® OPERATION MANUAL
SECTION 6: FRONT PANEL OPERATION
Page 91 of 274