Direct Data Entry - Presets - Pacific Power Source AFX Series Operation Manual

AFX SERIES® OPERATION MANUAL
SECTION 6: FRONT PANEL OPERATION
6.4.2

Direct Data Entry - Presets

Values for Frequency, Voltage, Current, Phase and Power can be entered directly using the
numeric keypad. Position the flashing cursor on the field for which you want to enter a new
setting value. Once a field is selected, press the first key of the value you want.
As soon as you enter the first digit, the soft keys will display commonly used values for the
parameter you are changing. For example, if you are on the Frequency fields, presets for 50
Hz, 60 Hz, 400 Hz and 800 Hz will appear.
If you are on the Voltage AC field, presets for 115 V, 230 V and 300 V will appear. A Low
Voltage Range selection will be offered as well allowing you to lock in the virtual low range
which limits AC voltage entry to no more than 150 Vac. This is illustrated on the image
below.
Direct Data
Direct Data
Entry in
Entry preset
progress
soft keys

Entire Contents Copyright 2016 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual Page 76 of 274