Verify Correct Ac Input Line Voltage - Pacific Power Source AFX Series Operation Manual

5.3

Verify Correct AC Input Line Voltage

The AFX Series® power supply can be ordered with a range of 3 phase AC input voltage
configurations. Prior to connecting the AC power source to the local mains, it is important
to check the type label on the unit to verify that its AC input configuration matches the local
utility power.
Do not connect the power supply to the mains if the AC input voltage, phasing and
frequency does not match.
DO NOT CONNECT A 208 – 240 V AC INPUT AFX MODEL TO A
380V, 400V OR 480V OR HIGHER THREE PHASE UTILITY LINE
VOLTAGE AS DAMAGE TO THE UNIT MAY OCCUR.
DO NOT CONNECT A 380 – 480 V AC INPUT AFX MODEL TO A
208V TO 240V THREE PHASE UTILITY LINE VOLTAGE AS THE
NE PAS CONNECTER UNE 208-240 V AC ENTRÉE AFX MODÈLE
À UN 380V, 400V OU 480V OU PLUS DE TROIS PHASES
UTILITAIRE TENSION EN PANNE QUI PEUT SE PRODUIRE.
NE PAS CONNECTER UNE 380 - 480 V AC ENTRÉE AFX
MODÈLE À UN 208V TO 240V TRIPHASE UTILITAIRE TENSION
QUE L'APPAREIL NE FONCTIONNE PAS.

Entire Contents Copyright 2016 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
WARNING
UNIT WILL NOT OPERATE.
AVERTISSEMENT
AFX SERIES® OPERATION MANUAL
SECTION 5: UNPACKING AND INSTALLATION
Page 33 of 274