Program Soft Keys - Pacific Power Source AFX Series Operation Manual

6.4.5

PROGRAM Soft Keys

The following five soft keys are available on the main PROGRAM screen.
SOFT KEY
Presets (SK1)
Protection (SK2)

Entire Contents Copyright 2016 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
Description
Changes all soft keys to up to five preset values that may be used to
change the selected parameter to any of the preset values shown
on the soft key labels. This provides a quick way to set commonly
used values.
The following presets are offered for the parameters listed:
Frequency 50Hz, 60Hz, 400Hz, 800Hz, 1200Hz
Voltage AC 115V, 230V, 300V
Voltage DC MAX, 200V, 0V, -200V, MIN
Current limit MAX, 15A, 4A, PEAK CURRENT
Power limit MAX, 4kW, 2kW, 1kW
kVA limit MAX, 4kVA, 2kVA, 1kVA
Displays the POWER AND CURRENT PROTECTIONS screen shown
below.
There are two check box options and one data field on this screen
that can be set as needed:
Enable RMS current protection
Enable power protection
Trip time:
AFX SERIES® OPERATION MANUAL
SECTION 6: FRONT PANEL OPERATION
Activates the programmable
current limit function at the value
set in the main program screen
Activates power protection at W
and kVA set points.
Determines how long the power
source will allow the power level
setting to be exceeded before
tripping off.
Page 79 of 274