Kalamazoo K42DB-1-NA Use And Care Manual page 48

To Remove the Control Panel:
1. Open the cleanout tray (A). The control panel can be rested
on the cleanout tray while you are working.
2. Remove the control knobs (B).
3. Remove the quarter-turn fasteners (C).
4. Allow the control panel (D) to slide down
on the keyways (E).
5. Gently pull the control panel forward to
access the wiring harness.
6. Carefully disconnect the Molex
connectors for each electronic control
bezel, plus the blade connectors for
the rotisserie motor and task lighting
switches.
B
A
44
To Reinstall the Control Panel:
1. Reconnect the Molex connectors to
each control bezel and the blade
connectors for the rotisserie and task
lighting switches.
2. Position the keyway holes on the
control panel over the studs on the
body of the grill.
3. Slide the control panel upward until
the holes for the quarter-turn fasteners
are aligned with the receivers on the
body of the grill.
4. Reinstall the quarter-turn fasteners.
FIGURE 22
E
D
C
KalamazooGourmet.com