Gas Requirements - Kalamazoo K42DB-1-NA Use And Care Manual

Liquid Propane Gas Requirements
(20-Pound Cylinder)
Verify the type of gas your grill has been configured for by the factory by checking the serial
tag inside the cleanout tray of the grill. Grills configured for liquid propane (LP) gas are orificed
differently than grills configured for natural gas (NG). Grills configured for use with 20-pound LP
cylinders (Type 1) are shipped with a dual-stage LP regulator hose assembly (see Figure 3).
Connection: LP regulator hose assembly (included) connects to the grill via 0.5" NPT male with a
0.375" flare adapter (included).
Input Pressure via LP regulator hose assembly: 11" W.C.
Manifold Pressure: 10.5" W.C.
To connect the LP regulator hose assembly to the LP tank, first make sure the main valve on the tank
is completely closed. Make sure also that all control valves on the front of the grill are OFF.
Thread the regulator inlet over the tank valve. Use care to ensure proper
alignment of the threaded coupler and avoid cross-threading or
damaging the coupler. Turn the coupler clockwise until tightened
up, but do not over-tighten.
FIGURE 3 (Freestanding Model)
8
DUAL-STAGE REGULATOR
11" W.C. PRESSURE
THREADED COUPLER
MAIN TANK VALVE
20-POUND LP CYLINDER
STRAPS TO SECURE CYLINDER
KalamazooGourmet.com