Kalamazoo K42DB-1-NA Use And Care Manual page 15

Bulk Supply Liquid Propane Gas Requirements
Verify the type of gas your grill has been configured for by the factory by checking the serial
tag inside the cleanout tray of the grill. Grills configured for liquid propane (LP) gas are orificed
differently than grills configured for natural gas (NG). Grills configured for use with a bulk LP supply
are shipped with a gray hose with a quick-connect fitting.
Connection: 1/2" NPT male. Quick-connect hose assembly (included) connects to the grill via
0.625" flare fitting.
Input Pressure: 11.0" W.C. (27.4 mbar)
Manifold Pressure: 10" W.C. (26.1 mbar)
All pipe sealants must be an approved type and safe for use with LP gas.
11" W.C. BULK LIQUID
PROPANE GAS SUPPLY
SUPPLY END
INSTALLER-SUPPLIED SHUT-
OFF VALVE WITH 1/2" MALE
NPT CONNECTION FOR GRILL
FIGURE 5
+1.800.868.1699
INCLUDED 10" W.C. REGULATOR
INCLUDED BRASS FITTING CONNECTS
INCLUDED REGULATOR TO INCLUDED
QUICK-CONNECT FITTING
INCLUDED QUICK-CONNECT
FITTING AND 10' FLEXIBLE
GAS HOSE
GRILL END
INCLUDED 10' FLEXIBLE
GAS HOSE CONNECTS TO
GRILL WITH FLARE FITTING
(NO PIPE SEALANT
NEEDED HERE)
FITTING ON GRILL CAN BE
ROTATED 90° STRAIGHT
DOWN IF PREFERRED
11