Kalamazoo K42DB-1-NA Use And Care Manual page 13

IMPORTANT:
Always close the main valve on the tank
before disconnecting or transporting the tank.
IMPORTANT:
After connecting a fresh LP tank,
you may need to purge air from the system. Before
lighting, open the main valve on the tank. Turn the
control valves on the grill to the HIGH position for
about 15 seconds to purge air from the system. Turn
the control valves on the grill OFF and wait 5 minutes
for any gas to clear. Finally, continue with the normal
lighting procedure.
The installation must conform with local codes. In the
absence of local codes, the installation must conform
with the National Fuel Gas Code, ANSI Z223.1/NFPA
54; Storage and Handling of Liquefied Petroleum
Gases, ANSI/NFPA 58; Natural Gas and Propane
Installation Code, CSA B149.1; or Propane Storage and
Handling, CSA B149.2.
FIGURE 4 (Built-in Model shown
with K-42DBC-LVP Base Cabinet
designed for proper
safety venting)
+1.800.868.1699
SECONDARY 10" W.C.
PRESSURE REGULATOR
CONNECTS TO GRILL.
DUAL-STAGE 11" W.C.
PRESSURE REGULATOR
HOSE CONNECTS
TO SECONDARY
REGULATOR
9