Inserting Battery; Switching On And Measuring - LaserLiner MasterLevel Box Manual

To avoid interference/disruption, always keep the implant or device
a safe distance of at least 30 cm away from the magnet.
1
2
3
4
5
1 Hold function active
2 Slope direction 0.00°
3 ON/OFF button
4 Magnetic measuring edge
5 Battery compartment (Rear)

Inserting battery

1
Open the battery compartment
and insert battery according to the
symbols. Be sure to pay attention
to polarity.
2

Switching on and measuring

!
Make sure that the reference function is deactivated before
measuring ABS ON.
– Switch the DigiLevel Plus on using the on/off switch (3).
– The slope angle (7) is shown in the display. If slopes are
measured overhead, the direction of display adjusts automatically.
– The current slope direction is also shown by the symbol (2).
MasterLevel Box
6
7
8
9
6 ABS mode active
7 Slope angle
8 ABS mode/relative
measuring mode selection
9 Hold function on/off
–
07
EN