Advertisement
Quick Links
MultiBeam-Laser MBL 5
Bedienungsanleitung
D
Operating instructions
GB
Gebruiksaanwijzing
NL
Betjeningsvejledning
DK
Mode d´emploi
F
Instrucciones para su uso
E
Istruzioni d'uso
I
Instrukcja Obsługi
PL
Käyttöohje
FI
3-6
7-10
11-14
15-18
19-22
23-26
27-30
31-34
35-38
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for LaserLiner MBL 5
Summary of Contents for LaserLiner MBL 5
- Page 1 MultiBeam-Laser MBL 5 Bedienungsanleitung Operating instructions 7-10 Gebruiksaanwijzing 11-14 Betjeningsvejledning 15-18 Mode d´emploi 19-22 Instrucciones para su uso 23-26 Istruzioni d'uso 27-30 Instrukcja Obsługi 31-34 Käyttöohje 35-38...
- Page 2 MultiBeam-Laser MBL 5...
- Page 3 MultiBeam-Laser MBL 5 Ideal for aligning on all surfaces Automatic 5-spot 635 nm laser with magnetically damped pendulum system. All 5 lasers are set at right angles to each other. This makes practically all alignment tasks possible. Additionally, the housing can be turned to...
- Page 4 MultiBeam-Laser MBL 5 Magnetic base Laser emitting window Side beam calibration port (Y-axix) Rubber grip housing Magnets Battery compartment- cover 10 5/8” nut for connection to 1/4” nut for connection constrution tripod to camera tripod (mount from bottom). ON / OFF-Switch...
-
Page 5: Technical Data
MultiBeam-Laser MBL 5 Case dimensions – laserbeams Z-axis Measures in mm Technical Data Automatic levelling side-side + 4° range forward-backward + 6° Accuracy + 2 mm / 10 m Operating range ca. 100 m (depending on room illumination) 3 x 1,5V AA / Power supply ca. - Page 6 MultiBeam-Laser MBL 5 Preparing the calibration check It is possible for you to check the calibration of the laser. To do this, position the device midway between 2 walls, which must be at least 5 metre apart. Switch the device on.
Need help?
Do you have a question about the MBL 5 and is the answer not in the manual?
Questions and answers