Related Manuals for LaserLiner Greenline-Laser 3P
Summary of Contents for LaserLiner Greenline-Laser 3P
- Page 1 Greenline-Laser 3P / 5P Laser 532-650 nm Greenline- Greenline- Laser 3P Laser 5P...
-
Page 2: Function / Application
Read the operating instructions and the enclosed brochure „Guarantee and additional notices“ completely. Follow the instructions they contain. Safely keep these documents for future reference. Function / Application Cross-line laser with intense light green laser lines for horizontal and vertical levelling with plum function. -
Page 3: Special Product Features
Greenline-Laser 3P / 5P Special product features Automatic alignment of the device with a magnetically dampened pendulum system. The device is brought into initial position and aligns itself autonomously. Transport LOCK: The device is protected with a pendelum lock during transport. - Page 4 Laser emitting window ON / OFF switch; Transport fastener Vernier adjustment 5/8" thread (underside) Window for plumb laser (underside) Adjustable feet with removable rubber caps Adapter for crank tripods and teleskopic stands Vial for approximate alignment Battery compartment 10 Hand receiver mode 11 Horizontal laser lines 12 Vertical laser line Connection socket...
- Page 5 Greenline-Laser 3P / 5P Use of lithium-ion rechargeable battery Before using the laser for the first time, insert the battery in the device and fully charge (at least 5 hours). Connect the battery charger to charge the battery. The LED lights red while the battery is charging and green when the battery is fully charged.
- Page 6 Hand receiver mode Optional: Working with the laser receiver GRX Use an GRX laser receiver (optional) to carry out levelling at great distances or when the laser lines are no longer visible. To work with a laser receiver, switch the line laser into hand receiver mode with the Hand receiver mode button (10).
- Page 7 Greenline-Laser 3P / 5P Preparing the calibration check: It is possible for you to check the calibration of the laser. To do this, position the device midway between 2 walls, which must be at least 5 metres apart. Do this by turning the unit on, thus releasing the transport restraint (cross laser on).
- Page 8 Checking the vertical line: Position the device about 5 m from a wall. Fix a plumb bob with a line of 2.5 m length on the wall, making sure that the bob can swing freely. Switch on the device and align the vertical laser to the plumb line. The precision is within the specified tolerance if the deviation between the laser line and the plumb line is not greater than ±...
- Page 9 Greenline-Laser 3P / 5P EU directives and disposal This device complies with all necessary standards for the free movement of goods within the EU. This product is an electric device and must be collected separately for disposal according to the European Directive on waste electrical and electronic equipment.
- Page 10 Greenline-Laser 3P / 5P SERVICE Umarex GmbH & Co KG – Laserliner – Möhnestraße 149, 59755 Arnsberg, Germany Tel.: +49 2932 638-300, Fax: +49 2932 638-333 laserliner@umarex.de Umarex GmbH & Co KG Donnerfeld 2 59757 Arnsberg, Germany Tel.: +49 2932 638-300, Fax: -333...