Safety; Intended Use; General Safety Instructions - PI P-88 Series User Manual

2 Safety

2 Safety
In this Chapter

Intended Use .................................................................................................................................. 5

General Safety Instructions............................................................................................................ 5

Organizational Measures ............................................................................................................... 7
2.1 Intended Use
The P-88x/P-08x is intended to be used in an environment which is free of dirt, oil, and
lubricants.
In accordance with its design, the P-88x/P-08x is intended for integration into a mechanical
system and for the following applications:
Positioning of loads

Dynamic positioning

Vibration damping

Force generation

The operator is responsible for a standards-compliant integration of the P-88x/P-08x into the
overall system.
The motion of the P-88x/P-08x takes place on one axis. When mounting the actuator without
applying a preload, pay attention to the maximum tensile stress capacity (p. 51).
For operation of the P-88x/P-08x, suitable electronics that provide the required operating
voltages are required. The electronics are not included in the scope of delivery of the
P-88x/P-08x. We recommend the use of suitable electronics (p. 12) from PI.
2.2 General Safety Instructions
The P-88x/P-08x is built according to state-of-the-art technology and recognized safety
standards. Improper use can result in personal injury and/or damage to the P-88x/P-08x.
 Use the P-88x/P-08x for its intended purpose only, and only when it is in perfect
technical condition.
 Read the user manual.
 Eliminate any malfunctions that may affect safety immediately.
The operator is responsible for the correct installation and operation of the P-88x/P-08x.
P-88x/P-08x Piezo Actuator PZ259E Version: 1.1.0 5