Table of Contents
Advertisement
3 Product Description
3.2
Product View
The figure serves as an example and can differ from your model.
Figure 1:
3.3
Product Labeling
Before delivery, each P-88x/P-08x is vacuum-packed in an ESD protection bag that prevents the
piezo actuator from becoming charged during transport. Larger actuators are additionally
packed in tubes to protect them against breakage.
Every ESD protection bag has a sticker with the following information:
Labeling
P-88x/P-08x Piezo Actuator
Example of product view: P-88x (A) and P-080 (B)
Ceramic end surface (passive PZT ceramic)
1
Marking for positive pole
2
Contact strip
3
Shrink tube (strain relief of the stranded wires)
4
Black stranded wire: Connection for ground (-)
5
Red stranded wire: Voltage connection (+)
6
The arrows in the figure indicate the expansion direction of the piezo actuator
when a positive voltage is applied.
Description
Data Matrix code (example; contains the abbreviated batch
number and the product number)
PZ259E
Version: 1.1.0
11
Advertisement
Table of Contents
