Maintenance; General Notes On Maintenance; Cleaning The P-88X/P-08X - PI P-88 Series User Manual

7 Maintenance

7 Maintenance
In this Chapter

General Notes on Maintenance ................................................................................................... 41

Cleaning the P-88x/P-08x ............................................................................................................. 41

7.1 General Notes on Maintenance
The P-88x/P-08x is maintenance-free.
7.2 Cleaning the P-88x/P-08x
NOTICE
Destruction of the piezo actuator due to electric flashovers!
If it comes into contact with liquids, the piezo actuator can be destroyed by electric flashovers.
Before cleaning the P-88x/P-08x:
 Ensure that the P-88x/P-08x is discharged (p. 39) and short-circuited (p. 40).
After cleaning the P-88x/P-08x:
 Dry the P-88x/P-08x completely in a drying cabinet (recommended duration: 30 minutes at
40 °C).
NOTICE
Damage due to use of unsuitable cleaning agents!
Some cleaning agents may cause damage to the P-88x/P-08x.
 Do not use acetone and do not use water for cleaning.
Requirements
 The P-88x/P-08x is discharged (p. 39) and short-circuited (p. 40).
 The P-88x/P-08x is disconnected from the electronics.
Cleaning the P-88x/P-08x
 Touch the piezo actuator only with powder-free nitrile or latex gloves.
 When necessary, clean the surfaces of the P-88x/P-08x with a lint-free cloth that is
dampened with a mild cleanser (e.g., isopropyl alcohol or ethanol).
P-88x/P-08x Piezo Actuator PZ259E Version: 1.1.0 41