Table of Contents
Advertisement
Chapter 3
3.8
JP15 - POWER LED
Attach the power led cable to this connector. If the system is power on, the indicator
lights.
3.9
JP16 - RESET
Attach the Reset switch cable to this connector. The Reset switch restarts the
system.
3.10 JP17 - SPEAKER
JP17 is a four pins connector, which is used to connect the system speaker.
3.11 FAN1 – CPU FAN CONNECTOR
FAN1 is a three pin connector, which is used to connect with the CPU Fan Power
cable.
3.12 FAN2, 3 – SYSTEM FAN CONNECTORS
Additional System Fan can be connected to these connectors.
14
Fig. 8 Power LED
Fig. 9 Speaker
Advertisement
Table of Contents
