Table of Contents
Advertisement
Onboard LAN Option ROM Type
Use this feature to select the option for onboard LAN devices. The options are Legacy and
EFI. Select Legacy to display and configure the Onboard LAN1 - LAN8 Option ROM features.
Onboard LAN1 Option ROM
Use this feature to select which option for LAN Port 1 is used for system boot. The options
are Disabled, PXE, and iSCSI.
Onboard LAN2 - LAN4 Option ROM
Use this feature to select which option for the specified LAN ports is used for system boot.
The options are Disabled and PXE.
Onboard LAN5 - LAN8 Option ROM
Use this feature to select which option for the specified LAN ports is used for system boot.
The options are Disabled and Legacy.
Onboard Video Option ROM
Use this feature to select the Onboard Video Option ROM type. The options are Disabled,
Legacy, and EFI.
Network Stack Configuration
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are Enabled and Disabled.
*If the feature above is set to Enabled, the next six features will be available for
configuration:
Ipv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and Enabled.
Ipv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. The options are Disabled and Enabled.
Ipv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. The options are Disabled and Enabled.
Ipv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. The options are Disabled and Enabled.
PXE Boot Wait Time
Use this option to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0.
71
Chapter 6: UEFI BIOS
Advertisement
Table of Contents
