Supermicro SuperServer E302 Series User Manual page 65

Intel® VMD Technology

Intel® VMD for Volume Management Device on CPU

VMD Config for PStack0
Intel® VMD for Volume Management Device
Select Enable to use the Intel Volume Management Device Technology for this stack.
The options are Disable and Enable.
*If the feature above is set to Enable, the following features will be available
for configuration:
CPU SLOT6 PCI-E 3.0X16 VMD
Use this feature to enable or disable Volume Management Device (VMD) Technology
for this port. The options are Disable and Enable.
Hot Plug Capable (Available when the device is detected by the system)
Use this feature to enable hot plug support for PCIe root ports 1A~1D. The options
are Disable and Enable.
PCI-E Completion Timeout Disable
Use this feature to enable PCIe Completion Timeout support for electric tuning. The op-
tions are Yes, No, and Per-Port.
South Bridge Configuration

The following South Bridge information will display:
•
USB Module Version
•
USB Devices
Legacy USB Support
Select Enabled to support onboard legacy USB devices. Select Auto to disable legacy support
if there are no legacy USB devices present. Select Disable to have all USB devices available
for EFI applications only. The options are Enabled, Disabled, and Auto.
XHCI Hand-off
This is a work-around solution for operating systems that do not support XHCI (Extensible
Host Controller Interface) hand-off. The XHCI ownership change should be claimed by the
XHCI driver. The settings are Enabled and Disabled.
65
Chapter 6: UEFI BIOS