Supermicro SuperServer E302 Series User Manual page 45

SMBus to PCI-E Slots
Use jumpers JI2C1 and JI2C2 to enable PCIe SMB (System Management Bus) support to
improve system management for the onboard PCIe slot.
Mini-SAS HDD NVMe/SATA Mode Select
Use jumper JNS1 to select the Mini-SAS hard disk drive mode as either NVMe or SATA.
USB Wake Up
Use the JPUSB1 jumper to enable system wake up via a USB device. This jumper allows you
to wake up the system by pressing a key on the USB keyboard or by clicking the USB mouse.
Enable the jumper to activate this function. When the USB Wake Up function is enabled, it
will be active on all USB ports.
SMBus to PCIe Slots
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled (Default)
Mini-SAS HDD NVMe/SATA Mode Select
Jumper Settings
Jumper Setting Definition
Pins 1-2 SATA (Default)
Pins 2-3 NVMe
USB Wake Up
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
45
Chapter 4: Motherboard Connections