Supermicro SuperServer E302 Series User Manual page 34

SuperServer E302-9D User's Manual
Chassis Intrusion
A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable
from the chassis to inform you of a chassis intrusion when the chassis is opened. Refer to
the table below for pin definitions.
General Purpose I/O Header
The JGP1 (General Purpose Input/Output) header is a general purpose I/O expander on a
pin header via the SMBus. Refer to the table below for pin definitions.
Serial General Purpose I/O Header
One S-SGPIO (Serial Link General Purpose Input/Output) header is at S-SGPIO1 on the
motherboard. Refer to the table below for pin definitions.
NVMe I C Header
2
JNVI2C1 is a management header for the Supermicro AOC NVMe PCIe peripheral cards.
Connect a corresponding I
Chassis Intrusion
Pin Definitions
Pin# Definition
1 Intrusion Input
2 Ground
GPIO Header
Pin Definitions
Pin# Definition Pin#
1 +5V Power 2
3 GP0 4
5 GP2 6
7 GP5 8
9 GP6 10
SGPIO Header
Pin Definitions
Pin# Definition Pin#
1 NC 2
3 GND 4
5 Load 6
7 Clock 8
NC = No Connection
C cable to this header. Refer to the table below for pin definitions.
2
I C Header
2
Pin Definitions
Pin# Definition
1 PE_HP_SCL
2 Ground
3 PE_HP_SDA
4 PVCCIO
34
Definition
GND
GP1
GP3
GP5
GP7
Definition
NC
Data
GND
NC