Table of Contents
Advertisement
Chapter 3: Maintenance and Component Installation
Figure 3-6. Installing 7mm 2.5" Hard Drives
5. Optionally, for a 7mm 2.5" drive, slide it inside the tray first, then secure it to the drive
tray with the standoff plugs as shown above.
6. Connect the drive data and power cables.
7. Secure the tray to the chassis by pushing the tray down into the slots.
8. Attach the cables to the appropriate motherboard connector(s).
9. Reinstall the chassis cover and power up the system.
31
Advertisement
Table of Contents
