Table of Contents
Advertisement
1. Determine mounting holes based on the hole positions in the mounting ears, and mark
the mounting holes using a marker.
Unit: mm
If you need to use a ladder to
install the device on a high
position, take measures to protect
yourself from falling down.
2. Drill holes by using a hammer drill and install expansion sleeves, washers, and tapping screws.
Unit: mm
3. Put the tapping screws through the SmartLogger mounting ears and washers into the mounting
holes in the wall.
4. Tighten the tapping screws using a torque screwdriver.
7
Advertisement
Table of Contents
