Table of Contents
Advertisement
Two-wire
9
Connecting Network Cables to the Ethernet Electrical Port
1. The SmartLogger provides two Ethernet electrical ports, through which the SmartLogger can
connect to a third-party device.
2. The SmartLogger can be connected to an Ethernet LAN switch or router, and then connected to
a PC. It can also be directly connected to a PC. Select the connection device based on the
actual networking scenario.
3. Verify that the Ethernet communications cable is no longer than 100 m.
1. Connect one end of the delivered network cable to the Ethernet electrical port of a device.
2. Connect the other end of the network cable to the ETH1 or ETH2 port of the SmartLogger.
Three-wire
15
Advertisement
Table of Contents
