Related Manuals for ARTHUR HOLM AH15D3 HDGA
Summary of Contents for ARTHUR HOLM AH15D3 HDGA
- Page 1 User manual AH15D3 HDGA AH19D3 HDGA AH17D3 HDGA AH22D3 16GA Electrically motorised monitor for furniture integration. Vertical working position...
-
Page 2: Table Of Contents
Table of contents EC REGULATIONS & SECURITY SAFETY INSTRUCTIONS APPLICATIONS FEATURES BOX CONTENTS PREPARATION FOR INSTALLATION CONTROLS & INPUT CONNECTORS OSD MENU AHnet PROTOCOL INPUT SIGNALS PRODUCT WARRANTY... - Page 3 Welcome Thank you for purchasing an ARTHUR HOLM product. Our product range has been designed to create the perfect meeting room, where the screens are a part of the interior design as well as essential communication tools. Please, read this installation and operating instructions carefully and keep them in a safe place for future reference.
-
Page 4: Ec Regulations & Security
EC Regulations and Security ATTENTION: Do not disassemble or modify the device in any way. This symbol warns of the presence of dangerous un-insulated voltages inside some of the components, of sufficient magnitude to expose people to risk of electronic shock. This symbol draws attention to important use and maintenance instructions in the manual that accompanies the unit. -
Page 5: Safety Instructions
Safety instructions PLUGS – Do not dismantle any part of the monitor power connector – Disconnect the power plug from the AC outlet when the monitor is not going to be used for an indefinite period of time POWER AND EXTENSIONS CORDS –... -
Page 6: Applications
With the push of a button, the monitor is lifted to be used vertically. FEATURES - TFT Active Matrix display AH15D3 HDGA 15.6’’, widescreen format, FULL HD AH17D3 HDGA 17.3’’, widescreen format, FULL HD AH19D3 HDGA 18.5’’, widescreen format, FULL HD... -
Page 7: Preparation For Installation
Preparation for Installation Before the installation of the device, please make sure to follow these steps: - Remove the two lateral transport plastic screws M8x30 - Remove the two front transport plastic screws M8x30... - Page 8 Preparation for Installation Follow the next steps to pack the device for a safe shipment: Dynamic3 with cover plate Dynamic3 with external control buttons Permanent press button 1 until the monitor housing gets released from the frame. Insert the two plastic screws (M8x30) entirely. To close the monitor, permanent press button 2 until the monitor housing touches the two plastic screws.
-
Page 9: Controls & Input Connectors
Controls & Input connectors DVI 1/ DVI A DVI-I input signal. Connect a DVI (digital) input signal and select DVI 1 on the OSD monitor menu. Use a DVI to VGA adapter to connect an ARGB (analogue) input signal and select DVI-A on the OSD monitor menu DVI 2 DVI-D input signal. - Page 10 Controls & Input connectors Termination Activate (ON) the termination, ONLY on the last unit of the RS422 bus AHnet RJ45 CAT5 connector for addressable RS422 control. There is a loop through connector to use as signal RS422 output. Up to 30 monitors can be connected on the same RS422 bus USB connectors for mouse, keyboard, touch screen and webcam.
- Page 11 Controls & Input connectors MONITOR ADDRESS Below the monitor, there is a screen to configure the monitor. Press the UP or DOWN buttons to change the function. Press the OK button to select the function. Change the parameter using the UP or DOWN buttons and press OK again to save the changes.
- Page 12 Controls & Input connectors MONITOR MOVEMENT CONTROLS On the upper cover plate, there are three buttons to control the monitor’s up and down functions: 1- Button to open the monitor 2- Button to close the monitor, screen facing up 3- Button to close the monitor, screen facing down 1.
-
Page 13: Osd Menu
OSD menu ACCESSING THE MENU SYSTEM – With the OSD off, push the MENU button to activate the main OSD menu – Press the UP and DOWN button to move from one function to another. Please refer to the following sections below to view a complete list of all the functions available for the monitor –... - Page 14 OSD menu PICTURE Noise Reduction Adjusts the image noise filter Middle High Default Screen (Only for analogue signals) Auto Adjust Horizontal Pos. Vertical Pos. Size Phase Backlight Adjust the backlight of the screen Colour Range 0 – 255 16 – 235...
- Page 15 OSD menu OPTION OSD Language Selects OSD language Restore Factory Default Adjusts the parameters as factory Blending OSD window transparency Middle High OSD Duration Adjusts the time that the OSD menu window remains on screen Software Update (USB) Used for firmware upgrade Mirror 0: Image with no flip 1: Vertical flip...
-
Page 16: Ahnet Protocol
AHnet protocol COMMUNICATIONS PROTOCOL Communication RS422 Connection RJ45 Wiring CAT-5 SPEED & CONFIGURATION Baud Rate 38400 Data Bits Parity None Stop Bits WIRING DIAGRAM Data TX + Data TX – Data RX + Data RX – RJ-45 CONNECTION Pins 1 & 2 The units respond Pins 3 &... - Page 17 AHnet protocol AHnet PROTOCOL Using 5 bytes communication: BYTE 0 START BYTE BYTE 1 ADDRESS BYTE BYTE 2 COMMAND BYTE BYTE 3 VALUE 1 BYTE 4 VALUE2 COMMANDS COMMAND DESCRIPTION RESPONSE FA XX 01 00 00 GO DOWN, BOTTOM FB XX 01 00 00 FA XX 01 01 00 GO UP + INCLINATION FB XX 01 01 00...
- Page 18 AHnet protocol PICTURE COMMANDS COMMAND DESCRIPTION RESPONSE FA XX 15 00 00 ASK FOR BACKLIGHT LEVEL FB XX 15 00 ZZ FA XX 16 00 00 ASK FOR CONTRAST LEVEL FB XX 16 00 ZZ FA XX 17 00 00 ASK FOR BRIGHTNESS LEVEL FB XX 17 00 ZZ Number of the monitor address.
- Page 19 AHnet protocol BITE SCREEN ON SCREEN OFF DVI-A DVI-1 DVI-2 PROTECTION STOP MONITOR OK BITE BUTTON LOCK BUTTON UNLOCK...
-
Page 20: Input Signals
Input Signals AH15D3 HDGA, AH17D3 HDGA, AH19D3 HDGA, AH22D3 16GA RESOLUTION Horizontal freq (KHz) Vertical freq (Hz) Scanning type 800x600@60Hz 37.879 60.317 Progressive 800x600@72Hz 48.077 72.188 Progressive 800x600@75Hz 46.875 75.000 Progressive 1024x768@60Hz 48.363 60.005 Progressive 1024x768@70Hz 56.476 70.070 Progressive 1024x768@75Hz 60.023... - Page 22 Information on Disposal for users of waste Electrical & Electronic equipment This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis.
-
Page 23: Product Warranty
Product Warranty Albiral Display Solutions S.L WARRANTY - Valid from January 2016 This warranty covers the original product purchase for a period of 24 months from the date of purchase. GENERAL WARRANTY TERMS A) Parts. During the above mentioned warranty period, the replacement of any electronic and mechanical parts against any defects in manufacturing. - Page 24 Patents P 24821 RUPC MU 1996 ES00 P 24821 USPC MU 16997 ES00 P 27178 EPPC MU 17180 ES00 P 27178 RUPC MU 17301 ES00 P 27178 USPC MU 17322 ES00 P 2784 EPPC MU 17376 ES00 P 2784 RUPC MU 1741 ES00 P 2784 USPC Fàtima 25, Sant Hipòlit de Voltregà...
Need help?
Do you have a question about the AH15D3 HDGA and is the answer not in the manual?
Questions and answers