Process Display - ABB HART FEP300 Commissioning Instruction

Button ◄ functions
Exit
Back
Cancel
Next
Button ► functions
Select
Edit
OK
• You can browse through the menu or select a number within a parameter value using both
▲ or ▼ buttons. The ► button selects the desired menu item.
4.2.2

Process display

CI/FEP300/FEH300-EN
Meaning
Exit menu.
Back one submenu.
Exit without saving the selected parameter value.
Select next position for entering numerical values or letters.
Meaning
Select submenu/parameter.
Edit parameter.
Save selected parameter and display stored parameter
value.
ProcessMaster / HygienicMaster
The process display appears after switching on
the unit.
Q Current flowrate
∑+ Totalizer value for forward flow direction
∑- Totalizer value for reverse flow direction
The meter location is displayed on the upper left
(for example, "Boiler 9"). The meter location can
be entered in the menu "Device Setup / Sensor /
Meter Location TAG".
If several operator pages are preconfigured and
the Multiplex mode is activated, the
appears on the lower left of the screen.
The lock at the bottom middle of the screen
indicates that the user is not currently logged in
and that the unit's setup cannot be changed.
Startup Operation
icon
EN - 29