HP Kayak XW U3-W3 Installation Manual page 22

When an IDE CD-ROM
Drive Is Installed
When a Flexible Disk
Drive Is Installed
HP Kayak XW U3 & W3 PC Workstation — Installing Accessories In Your HP PC Workstation
Installing Mass Storage Devices
Completing the Installation of a Drive
1 Switch on the computer and press
2 In the Setup program, select the Advanced menu, the IDE Devices
submenu. Check that the CD-ROM drive has been detected on the
IDE channel.
3 Press to save and exit the program.
1 Switch on the computer and press
2 In the Setup program, select the Advanced menu, the Flexible Disk
Drives submenu, and check that the drive has been detected.
3 Press to save and exit the program.
22 English
when appears.
Setup
when appears.
Setup