HP Kayak XW U3-W3 Installation Manual page 14

CAUTION
Align the hole in the drive
with the hole in the drive shelf
HP Kayak XW U3 & W3 PC Workstation — Installing Accessories In Your HP PC Workstation
Installing Mass Storage Devices
Installing a Hard Disk Drive in an Internal Shelf
Hard disk drives larger than one inch (1") in height can only be housed
in the lower internal shelf.
1 Disconnect the computer's power cord and any telecommunications
cable.
2 Remove the computer's cover (refer to page 3).
3 Remove the fan connection to the system board (refer to the
illustration on page 6).
4 Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it out of the PC Workstation's case.
5 Slide the power supply out to improve access to the internal shelf
(refer to page 6).
6 Slide the drive into position in the first internal shelf and align the
screw holes in the drive with the four self-retaining screws in the
drive shelf.
Screw hole
Self-retaining
screw
14 English