HP Kayak XW U3-W3 Installation Manual page 7

WARNING
Slide the power
supply unit clear of
the computer
Replacing the Power
Supply after Installing
Accessories
HP Kayak XW U3 & W3 PC Workstation — Installing Accessories In Your HP PC Workstation
To avoid electrical shock, do not open the power supply.
6 Slide the power supply out of the computer until it stops—the
power supply unit remains connected to the computer.
1 Check that all internal cables are safely routed.
2 Slide the power supply back into the computer.
3 Tighten the four self-retaining screws.
4 Replace the HP UltraFlow airflow guide.
5 Reconnect the fan to the system board.
Moving the Power Supply
Power Supply
English 7