Moving The Power Supply - HP Kayak XW U3-W3 Installation Manual

HP Kayak XW U3 & W3 PC Workstation — Installing Accessories In Your HP PC Workstation

Moving the Power Supply

Moving the Power Supply
1 Disconnect the computer's power cord and any telecommunications
cable.
2 Remove the computer's cover (refer to page 3).
3 Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it partly out of the PC Workstation's case.
Fan connection to
system board
HP UltraFlow
Airflow Guide
Retaining button
4 Remove the fan connection to the system board and lift the airflow
guide completely out of PC Workstation's case.
5 Unscrew the four self-retaining screws at the back of the power
supply.
Unscrew the
self-retaining screws
6 English