Download Print this page

Removing And Replacing The Cover - HP Kayak XU04 Installation Manual

Installing accessories in your hp pc workstation
Hide thumbs


HP Kayak XU PC Workstation — Installing Accessories In Your HP PC Workstation

Removing and Replacing the Cover

For your safety, never remove the PC Workstation's cover without first
removing the power cord from the power outlet, and any connection to
a telecommunications network. Always replace the cover on the
PC Workstation before switching it on again.
Removing the Cover
1 Switch off the display and computer.
2 Disconnect all power cables and any LAN or telecommunications
3 If necessary, unlock the cover using the key on the back panel.
4 Lift the two latches on the front sides of the computer upwards.
5 Grasp the cover on the sides at the back of the computer and slide
it forwards and off the computer.
Removing and Replacing the Cover



  Also See for HP Kayak XU04

  Related Manuals for HP Kayak XU04

This manual is also suitable for:

Kayak xu 04xxKayak xu series