Lavorwash EASY-R BT Manual page 39

Hide thumbs Also See for EASY-R BT:
Table of Contents

Advertisement

8.8.
THE BATTERY CHARGER DOESN'T WORK
 The battery charge doesn't start.
 Check that the battery charger is connected to the
battery. Consult the battery charger manual.
8.9.
THE BATTERIES DO NOT CHARGE OR DO
NOT HOLD A CHARGE
 At the end of the charging process, the battery is
not correctly charged (see the battery manufacturer's
instruction-maintenance manual)
 Check the battery charger error message and
check the data indicated on the display (see the bat-
tery charger's instruction manual).
 The batteries are new and do not generate 100% of
the rated performances.
 The accumulator reaches the maximum perfor-
mance after 20-30 complete charge cycles.
 The electrolyte has evaporated and does not com-
pletely cover the plates.
 Check the battery manufacturer's use and mainte-
nance manual.
 There are significant differences in density among
the various elements.
 Replace the damaged battery.
Always consult the battery and battery charger use and
maintenance manual. If this does not solve the pro-
blem, contact the authorised technical service centre.
The manufacturer CANNOT solve problems cau-
sed by using batteries and battery chargers that
were not directly supplied.
9.
CONDITIONS OF WARRANTY
All our appliances are subjected to rigorous tests and
are covered by warranty against material or manufac-
turing defects for a period of 12 months. The warranty
comes into effect from the date of purchase. The date
of purchase is the date indicated on the receipt issued
by the Reseller when the appliance is consigned. The
manufacturer shall repair or replace any faulty parts
free of charge during the period covered by the war-
ranty. Any defects, which cannot be clearly attributed
to material or manufacturing defects shall be exam-
ined by one of our Technical Service Centres or at our
factory and charged in accordance with the outcome.
The following are anyhow not covered by the warranty:
accidental damage during transportation or handling,
accidental damage caused by negligence or unsuitable
conduct, damage due to incorrect or improper uses or
installations which do not conform with the warnings
included in the instruction manual, and anyhow due to
unusual events which do not depend on the running
or use of the appliance. Appliances requiring repair
must be delivered at the Technical Service Centre com-
plete with all their original accessories together with
proof of purchase. If the appliance has been repaired
or tampered with by unauthorised third parties, the
warranty shall be considered null and void. The warran-
ty shall also be considered null and void if the user is
not able to produce an original (legible and complete)
document proving purchase or if it not possible to read
the appliance serial number located on the frame. The
appliance shall not be replaced and the warranty shall
not be extended once the appliance has been affect-
ed by a fault. Repairs shall be carried out at one of our
Authorised technical Service Centres or at our factory.
Appliances for repair must be sent carriage free, that
is, the user shall pay and be responsible for carriage.
The warranty does not cover the cleaning of working
parts, any scheduled maintenance nor the repair or
replacement of parts subject to normal wear and tear.
The manufacturer shall not be held liable for damage to
persons or things caused by any installation which does
not comply with the instructions in the manual or faulty
use of the appliance.
9.1.
SCRAPPING OF THE MACHINE
If the machine will no longer be used, remove the
batteries and dispose of them in accordance with the
eco-compatibility regulations as set forth in European
standard 2013/56/EU or deposit them in an authorised
collection centre.
To dispose of the machine, comply with the current
laws where it is used:
- disconnect the machine from the mains and clean it
after emptying any liquids;
- separate the machine into groups of homogeneous
materials (plastics in accordance with the recycling
symbol, metals, rubber, packing). For parts containing
different materials, contact the competent authorities;
Each homogeneous group must be disposed of in ac-
cordance with recycling laws.
In addition, it is recommended to eliminate those parts
of the machine that may be dangerous, especially for
children.
9.2.
DISPOSAL (WEEE)
As the owner of electrical or electronic equip-
ment, the law (in accordance with the EU Direc-
tive 2012/19/EU on waste from electrical and
electronic equipment and the national laws of
the EU Member States that have implemented this Di-
rective) prohibits you from disposing of this product or
its electrical / electronic accessories as municipal solid
waste and obliges you to make use of the appropriate
waste collection facilities.
The product can be disposed of by returning it to the
distributor when a new product is purchased. The new
product must be equivalent to that being disposed of.
Disposing of the product in the environment can cause
great harm to the environment itself and human health.
The symbol in the figure indicates the urban waste
containers and it is strictly prohibited to dispose of the
equipment in these containers. Non-compliance with
the regulations stipulated in the Directive 2012/19/EU
39

Advertisement

Table of Contents
loading

Table of Contents