Authenticating To Dce From A Gateway Server Machine - HP j6750 Supplementary Manual

The DFS/NFS Secure Gateway
Configuring Gateway Server Machines
from the authentication table or by a user who is logged into the NFS client
as the local root user. The command has no effect on authenticated access
the user may have from other NFS clients.
The syntax of the dfs_logout command follows:
dfs_logout [-h hostname] [dce_principal]
The command includes the following option and argument:
-h hostname
Specifies the hostname of the Gateway Server machine. By default, the
command uses the hostname of the machine that exports /... to the NFS
client. Use this option to contact a different Gateway Server.
dce_principal
Specifies the DCE principal name of the user whose entry is to be removed
from the authentication table. By default, the command deletes the entry for
the user who issues the command.
For example, the following ends the authenticated session of the issuer of the
command:
$ dfs_logout
See the man pages for the dfs_login and dfs_logout commands for detailed
information about the use and syntax of the commands.

Authenticating to DCE from a Gateway Server Machine

The dfsgw add command authenticates a user to DCE from a Gateway
Server machine. Users can use the dfsgw add command if the dfs_login
command is not installed on the NFS client from which they desire access to
DFS. System administrators can use the command to administer
authenticated access to DFS from a Gateway Server machine. Note that for
NFS clients not configured to enable DCE authentication, the dfsgw add
command represents the only avenue to DCE authentication.
The dfsgw add command provides essentially the same functionality as the
dfs_login command. However, unlike the dfs_login command, the dfsgw
add command does not communicate with the Gateway Server (dfsgwd)
process; it creates the login context and entry in the authentication table for
159