Stopping Enhanced Dfs - HP j6750 Supplementary Manual

Stopping Enhanced DFS

Neither dce_config nor the SAM-based DCM (DCE Configuration
Manager) can successfully stop Enhanced DFS daemons. Enhanced DFS
can only be stopped by rebooting the system. A reboot is required to stop
those Enhanced DFS daemons that are kernel processes. If Enhanced DFS is
started automatically at boot time and you want to prevent this, you can take
either of the following actions.
• Remove /sbin/rc2.d/S580dfs or rename the file not to begin with S, which is a
link to /sbin/init.d/dfs, prior to rebooting the node.
• Set the environment variables in /etc/rc.config.d/dfs from 1 to 0.
Installing and Configuring Enhanced DFS 3.0
Stopping Enhanced DFS
43