Boot Error Messages - HP Compaq t5125 Troubleshooting Manual

Hp compaq t5125: supplementary guide
Hide thumbs Also See for Compaq t5125:
Table of Contents

Advertisement

Diagnostics and Troubleshooting

Boot Error Messages

4-6
POST Messages
Press TAB to show POST screen Press the TAB key during POST to
Error: Non-System disk or disk
error
Boot Error Messages
Screen Messages
Bad Block Test Error Message:
"The internal diagnostics have
detected a problem."
www.hp.com
Procedures
display messages hidden by the HP
logo.
The BIOS was unable to find a
suitable boot device. For the t5000
Series, this may mean an uninitialized
or corrupt ATA Flash. Reflash the unit
and press any key when ready. For
more information, refer to
"Restoring the Flash Image."
Corrective Action
Too many bad flash memory
blocks. This is a hardware
problem. If the problem occurs
every time the terminal is turned
on, call your local HP Call
Center for a diagnosis. For the
phone numbers of an HP Call
Center near you, visit the
following Web site:
http://www.hp.com/cgi-bin/hp
support/index.pl
Troubleshooting Guide
Chapter 5,

Advertisement

Table of Contents
loading

Table of Contents