Page 1
HP Compaq t5000 April 2004 Thin Clients Configuring an HP Compaq t5300 or t5500 Thin Client Instructions for Kiosk Mode Table Of Table Of Contents ..................... 1 Abstract........................2 Contents Introduction ......................2 Adding a New User Account ..................2 Configuring for Kiosk Mode Using CE .NET HP Image Refresh 4.21......
Page 2
Configuring an HP Compaq t5300 or t5500 Thin Client for Kiosk Mode Abstract This paper explains how to configure an HP Compaq t5500 or t5300 thin client for Kiosk mode. Kiosk mode allows an administrator to configure a thin client device so that it has a Introduction single or limited purpose.
Page 3
Configuring an HP Compaq t5300 or t5500 Thin Client for Kiosk Mode The CE .NET 4.21 HP Image Refresh provides a simpler method of selecting Kiosk mode Configuring for than the previous image. Kiosk Mode Using CE .NET HP Image Refresh 4.21 Adding a Connection To set a terminal to run in Kiosk mode, you must first create a connection:...
Page 4
Configuring an HP Compaq t5300 or t5500 Thin Client for Kiosk Mode 1. Press the power button to start the system. 2. Enter Alt-F4 at the five-second log on display or Log on button. 3. Log on as the user of your choice.
Page 5
Configuring an HP Compaq t5300 or t5500 Thin Client for Kiosk Mode To enable Kiosk mode for the HP Compaq t5500 or t5300 thin client, perform the Configuring for following steps: Kiosk Mode Using CE .NET 1. Click the HP Connection Window Icon on the desktop area. HP Image 4.20 2.
Need help?
Do you have a question about the t5300 - Thin Client and is the answer not in the manual?
Questions and answers