HP Compaq t5125 Troubleshooting Manual page 26

HP t5000 Series Setup (F10) Utility
Ä
3-2
4. Use the arrow (up and down, or left and right) keys to select the
appropriate heading, then press the
Setup Utility menu, press the
5. To apply and save changes, select Save and Exit Setup.
❏
If you have made changes that you do not want applied, select
Exit without Saving.
❏
To reset to factory settings, select Load Factory Defaults.
This option will restore the original factory system defaults.
CAUTION: Do NOT turn the computer power OFF while the ROM is
saving your F10 Setup changes because the CMOS could become
corrupted. It is safe to turn off power to the computer ONLY after you exit
the F10 Setup screen.
t5000 Series Setup Utility
Heading Option
System
Information
✎
Support for specific Setup options may vary depending on your
hardware configuration.
www.hp.com
Enter
key. To return to the
Esc
key.
Description
Lists:
- Product name
- Processor type
- Processor Speed
- OEM Config Table Version
- Amount of Flash memory
- Memory size
- System ROM (includes family name
and version)
- Integrated MAC address for
embedded, enabled NIC (if applies)
- UUID (Universal Unique ID)
- Chassis serial number
- Asset tracking number
- Asset Tag Number (Sets Asset
tracking number)
Troubleshooting Guide