Removing and Replacing the Side Access Panel
and Chassis Cover
t5000 Series
✎
Å
Troubleshooting Guide
Replacing the CMOS Battery
The t5720 procedures differ. For more information, see
Model" on page 3
To replace the CMOS battery, you must remove the side access panel
and chassis cover as shown in the following sections.
WARNING: Before removing the side access panel, ensure that the thin
client is turned off and that the power cord is disconnected from the
electrical outlet.
1. Remove the two back panel screws 1.
www.hp.com
E
"t5720
E-1