Table of Contents
Advertisement
CD-ROM or DVD-ROM Drive
Figure 5-5. Locating the jumper positions for the 40X Max CD-ROM drive (IDE) or the
DVD-ROM drive
Zip Drive
The jumper positions for the 100- and 250-MB Zip drives are identical.
Drive Size:
Device 0 (Master)
Device 1 (Slave)
Cable Select (Default)
Key
Jumper NOT Installed
Jumper Installed
Figure 5-6. Locating the jumper position for the 100- and 250-MB Zip drive
100 MB
Default
Setting
Jumper Setting
for Cable Select
Configuration
C S M
S L A
Use CSEL
Model:
Note: After changing the jumper settings, reboot the
computer so the new address will be recognized.
IDE Settings
Connectors, Jumpers, and Switches 5-7
C S M
C S M
S L A
S L A
Slave
Master
Zip Drive
Advertisement
Table of Contents
