Canon Color imageCLASS MF9220Cdn Basic Operation Manual page 483

Error Messages
Message
No response from the server.
Check the settings.
Not enough TCP/IP resources.
Wait a moment and perform the
operation again.
Paper diff. from set size/type.
12-28
Description
The specified server settings are
incorrect, or the server is not turned
ON. Alternatively, the machine's
TCP/IP resources may be low.
You cannot browse the network due
to a lack of TCP/IP resources. This
may be because documents have
just been continuously sent or are
being continuously sent through FTP
or Windows (SMB).
– The following did not match when
copying, receiving faxes/I-faxes or
E-mails:
• The paper size specified on the
machine
• The size of the paper loaded in
the paper drawer
– The following did not match when
printing:
• The paper size specified on the
printer driver
• The paper size specified on the
machine
• The size of the paper loaded in
the paper drawer
Action
Wait for a while, and try browsing again.
If you still fail, try selecting another
server.
Wait for a while, and try browsing again.
– Change the following so that they
match:
• Paper size setting on the machine
• The size of the paper loaded in the
paper drawer
(See "Loading Paper" on p. 2-10 or
"Setting Paper Size and Type," on
p. 2-22.)
– Change the following so that they
match, and then retry printing:
• The paper size specified on the
printer driver
• The paper size specified on the
machine
• The size of the paper loaded in the
paper drawer
(See "Loading Paper" on p. 2-10,
"Setting Paper Size and Type," on
p. 2-22 or "Printing Fundamentals," in
the e-Manual.)