Canon Color imageCLASS MF9220Cdn Basic Operation Manual page 370

3
Use [▼], [▲] or
<Received Job Status>, then press [OK].
4
Use [▼], [▲] or
the job whose detailed information you
want to check, then press the left Any key
to select <Details>.
5
Check the details of the selected job.
(Scroll Wheel) to select
(Scroll Wheel) to select
Checking/Changing the Status of Fax Documents in Memory
■ If you want to erase the selected job:
① Press the right Any key to select <Done>,
then go to the next step.
■ If you complete this procedure:
① Go to step 8.
You can forward the selected job to another
destination by pressing the left Any key to select
<Forward>. For information on forwarding
received documents, see "Sending Documents in
Memory to a Different Destination, " on p. 5-140.
6
Make sure that the job you want to erase
is selected, then press the right Any key
to select <Erase>.
– To erase multiple documents from memory,
select and erase one document at a time.
– You cannot erase a document that is being
printed.
– If you select a document that is being received,
<Erase> changes to <Cancel>, enabling you to
cancel receiving the document.
5-149