Canon Color imageCLASS MF9220Cdn Basic Operation Manual page 239

Sending Fax Documents
6
Use [▼], [▲] or
<Set Destination>, then press [OK].
7
Make the scan settings you require.
You can specify the following settings:
– <Resolution Settings>: Adjusts the resolution
of originals. (See "Selecting Resolution, " on
p. 5-50.)
– <Density/Background Rem.Set.>: Adjusts the
density and the background color of originals.
(See "Adjusting Density, " on p. 5-51.)
– <Original Image Quality Settings>: Adjusts the
image quality of originals. (See "Selecting
Image Quality, " on p. 5-54.)
– <2-Sided Orig. Orientation Set.>: Scans two-
sided originals for sending. (See "2-Sided
Original, " on p. 5-56.)
– <Delayed TX Settings>: Sends scanned
documents at a specified time. (See "Sending
Originals at a Preset Time (Delayed Sending), "
on p. 5-58.)
– <Direct Send Settings>: Sends each page of
the document to the destination as it is
scanned. (See "Direct Sending, " on p. 5-61.)
– <Register Favorites>: Stores frequently used
send settings for future use. (See "Favorites, " on
p. 5-63.)
5-18
(Scroll Wheel) to select
8
Press (Start)
– Scanning starts if the original is placed in the
feeder, and the scanned data is sent to the
specified destination when scanning is
complete.
– To cancel scanning, press the left Any key to
select <Cancel> or press
9
Use [▼], [▲] or
the original size, then press [OK].
10
Press (Start).
– Scanning starts.
– To cancel scanning, press the left Any key to
select <Cancel> or press
(Stop).
(Scroll Wheel) to select
(Stop).